Guangdong LiYou Steel Structure Engineering Co., Ltd. +86 18923185602 teamworksteelstructure@aliyun.com
- All
- Product Name
- Product Keyword
- Product Model
- Product Summary
- Product Description
- Multi Field Search
 |
| Quantity: | |
|---|---|
9406900090
Steel structure lift shaft is a vertical shaft where steel structure can be lifted to the required height by means of a crane. It is an essential equipment of steel construction, which makes load transfer between the ground and the top floor.
The features of steel structure lift shaft includes:
Steel structure lift shaft are usually made up of several sections. Each section can be lifted by a crane and assembled with others in the shaft, so the overall height of the lift shaft can be easily changed.
Considering that there are many hardware components (piles, column, beam and etc.) in a lift shaft, steel structure is adopted as a framework for supporting load transfer and bearing capacity. Thereby, it only needs to design and assemble steel structure for lifting loads rather than concrete structure with many hardware components mentioned above. In addition, steel structure is much easier to assemble the components than concrete construction because no need to pour concrete or prepare site before installing steel structure.
Steel structure lift shaft are designed by consideration of center of gravity, load and flexure as well as other loads. The design can greatly simplify the calculation and reduce the amount of materials required, which is beneficial to steel structure.
This is basically because the steel structure can be assembled and transported to site at the time of construction, rather than on-site build or prefabrication, which will greatly improve procurement. It also greatly shortens the construction period and reduce cost.
Although steel structure lift shaft is more expensive than concrete structure one, the steel structure can be recycled in new building project or be used for another project. It can also avoid unnecessary waste of resources at a time when poor economy and environmental protection become a big issue. In addition, steel structure lift shaft not only needs regular maintenance (solid preservation), but also it will not affect surrounding environment (noise, dust or vibration) during construction period and after it is built for years to come.
Concrete structure lift shaft usually needs to be constructed to the lowest design standards, which requires high standards and specific knowledge for its manufacture. In addition, it is a complicated steel structure for its material usage. In contrast, steel structure lift shaft usually has a smaller size as compared to concrete structure (large enough for human use), which can increase the productivity and reduce the cost of its manufacturing process.
The basic construction of the steel structure lift shaft is generally in the form of an inverted U shape and in some cases, a circular shape.
This is because the basic construction of the steel structure lift shaft is in the form of an inverted U shape, which is generally hollow and has a relatively large size. Therefore, there are no need to paint steel structure before installation.
Steel structure lift shaft contains many metal components which have very small surface contact with each other. Therefore, it can avoid noise or vibration during load transfer when compared to concrete structure with its large number of metal components explained above. It will also reduce the pain on body when being lifted by crane.
Guangdong LiYou Steel Structure Engineering Co., Ltd. is headquartered in the National High-tech Development Zone, Shishan Town, Nanhai District, Foshan City, and the factory is located in Baini Town, Sanshui District, Foshan City. The head office was established on September 28, 2014. It is a service enterprise integrating steel structure consulting, design, production, construction, and maintenance. Mainly engaged in steel structure prefabricated buildings, including portal steel frames, pipe trusses, box columns/beams, steel lattice columns, H-shaped steel, and other steel structure products.
Working with steel comes with numerous challenges and complexities, and this is something we here at Teamwork Steel Structures understand better than most. Fortunately, we’ve been operating since 2008. During that time, we’ve amassed a wealth of knowledge and expertise in all facets of steel manufacturing. As such, whether you’re looking for a new factory or workshop, a steel-frame prefab home, or anything in between, our experts have the experience to make it possible.
Our engineers have all designed hundreds of projects and have at least ten years of project experience in this field. In addition, we have a professional installation team of 30 skilled workers who have been thoroughly trained to complete the installation task. As a result, we can provide top-notch home design and construction when you need to build your house quickly and within your budget, assisting you in striking a balance between quality, function, and cost.
Guangdong Liyou Steel Structure has been progressively improving over the last several years, thanks to the scientific management group of 60 workers, which consists of industry specialists and business professionals. We have committed ourselves to offer our customers top-notch, competent sales services. We have clients from all over the world, including Angola, Palau, the Maldives, Ethiopia, Tanzania, the Caribbean, South Africa, Austria, the United Arab Emirates, Thailand, Malaysia, Vietnam, Peru, Australia, and Cyprus. Under the premise of win-win cooperation, Teamwork Steel Structure would work genuinely with clients to develop better residences.
No matter what you might need, you can count on our specialist team to provide some of the most reliable and effective steel structures on the market. With over 100 staff working dedicated to our factories, we’re able to export projects to over seventy different countries and have completed hundreds of projects as a steel structure manufacturer for clients just like you.
So, why choose anyone else to support your construction project; choose our detailed and uncompromisingly high-quality construction solutions instead. By working to the highest possible specifications for every project. And, by creating projects bespoke to your ideas and sketches, we ensure amazing results every time.
Customized design steel structure elevator for workshop and commercial building
Steel structure elevator is made of the main steel framework comprised of H steel and sub-structure structures like beams, C purlin, steel bar, pipe, angle steel components, etc. The roof and walls utilize a variety of panels.
All the prefabricated buildings can be designed to meet the customized load and seismic requirements for different countries and specific areas. A steel building system means all the steel structure frame components are cut, welded, and drilled at our factory. All of them are well prepared and ready for bolt-together assembly at the construction site.
Place of Origin: | Type: |
Foshan, China (Mainland) | High-Strength Steel |
Application: | |
Steel Workshop, Steel Structure Platform, Steel Fabricated House, Structural Roofing etc. | |
Standard: | Carbon Structural Steel: |
GB | Q235B, Q355B |
Color | Life Span: |
Whitegrey | Main Steel Structure 50 Years |
Drawing Design: | Keywords: |
AutoCAD, Tekla Structure, Vertex BD, SketchUp etc. | Steel structure stair |
| I | Main steel frame | ||
| 2 | Steel Beam | 口 550X200X16X16 、H300X200X10X12、 8# steel | |
| 3 | Steel Tread | -6mm steel Q235B diamond plate | |
| 4 | Connecting plate | 6-25mm Q355B | |
| 5 | Connecting plate | 3mm-10mm | |
| 6 | Ceiling | Acrylic lighting plate, LED light | |
| 7 | Flooring | PVC, Marble, Granite | |
| 8 | COP | Integrated COP, Surface mounted COP, Touch free COP | |
| 9 | Glass | Tempered glass 10mm | |
| 10 | Structure steel fabrication+Sanding + Paint (Epoxy zinc-rich primer 40 um+Alkyd finish 40um) | Acetylene, oxygen, electrode, Sa2.5 | |
FAQ
Q 1: What should be prepare for the site before start to built?
At the very least, you need concrete piers for the columns to sit upon. Most people pour a full foundation, but if you are using the building on a farm or ranch and plan to have dirt, gravel, or sawdust floors, a pier system may be preferable. In these situations, a popular option is to combine piers with concrete footing around the perimeter of steel building.
Q2. Do you have a recommended foundation and associated drawing?
Yes, we will provide foundation drawing and installation drawing for you after shipment. But the foundation drawing is just for reference because land and soil are diverse in different area.
Q3. Can add a brick wall to my steel building?
Yes, you can. For combined durability and beauty there is nothing like adding brick finishes to walls of your steel building. You receive the benefits of a hard wall, such as fire resistance, along with moisture resistance of a cavity wall.
Q4. Why does wind speed affect prices?
For most of the steel structure buildings, we design wind speed is about 110km/h. But for some strong wind countries,110km/h is not enough, like the Philippines and Mauritius 150~280km/h wind speed need to enlarge the beam and column, that will use more steel on it then increase the price a lot.
Steel structure lift shaft is a vertical shaft where steel structure can be lifted to the required height by means of a crane. It is an essential equipment of steel construction, which makes load transfer between the ground and the top floor.
The features of steel structure lift shaft includes:
Steel structure lift shaft are usually made up of several sections. Each section can be lifted by a crane and assembled with others in the shaft, so the overall height of the lift shaft can be easily changed.
Considering that there are many hardware components (piles, column, beam and etc.) in a lift shaft, steel structure is adopted as a framework for supporting load transfer and bearing capacity. Thereby, it only needs to design and assemble steel structure for lifting loads rather than concrete structure with many hardware components mentioned above. In addition, steel structure is much easier to assemble the components than concrete construction because no need to pour concrete or prepare site before installing steel structure.
Steel structure lift shaft are designed by consideration of center of gravity, load and flexure as well as other loads. The design can greatly simplify the calculation and reduce the amount of materials required, which is beneficial to steel structure.
This is basically because the steel structure can be assembled and transported to site at the time of construction, rather than on-site build or prefabrication, which will greatly improve procurement. It also greatly shortens the construction period and reduce cost.
Although steel structure lift shaft is more expensive than concrete structure one, the steel structure can be recycled in new building project or be used for another project. It can also avoid unnecessary waste of resources at a time when poor economy and environmental protection become a big issue. In addition, steel structure lift shaft not only needs regular maintenance (solid preservation), but also it will not affect surrounding environment (noise, dust or vibration) during construction period and after it is built for years to come.
Concrete structure lift shaft usually needs to be constructed to the lowest design standards, which requires high standards and specific knowledge for its manufacture. In addition, it is a complicated steel structure for its material usage. In contrast, steel structure lift shaft usually has a smaller size as compared to concrete structure (large enough for human use), which can increase the productivity and reduce the cost of its manufacturing process.
The basic construction of the steel structure lift shaft is generally in the form of an inverted U shape and in some cases, a circular shape.
This is because the basic construction of the steel structure lift shaft is in the form of an inverted U shape, which is generally hollow and has a relatively large size. Therefore, there are no need to paint steel structure before installation.
Steel structure lift shaft contains many metal components which have very small surface contact with each other. Therefore, it can avoid noise or vibration during load transfer when compared to concrete structure with its large number of metal components explained above. It will also reduce the pain on body when being lifted by crane.
Guangdong LiYou Steel Structure Engineering Co., Ltd. is headquartered in the National High-tech Development Zone, Shishan Town, Nanhai District, Foshan City, and the factory is located in Baini Town, Sanshui District, Foshan City. The head office was established on September 28, 2014. It is a service enterprise integrating steel structure consulting, design, production, construction, and maintenance. Mainly engaged in steel structure prefabricated buildings, including portal steel frames, pipe trusses, box columns/beams, steel lattice columns, H-shaped steel, and other steel structure products.
Working with steel comes with numerous challenges and complexities, and this is something we here at Teamwork Steel Structures understand better than most. Fortunately, we’ve been operating since 2008. During that time, we’ve amassed a wealth of knowledge and expertise in all facets of steel manufacturing. As such, whether you’re looking for a new factory or workshop, a steel-frame prefab home, or anything in between, our experts have the experience to make it possible.
Our engineers have all designed hundreds of projects and have at least ten years of project experience in this field. In addition, we have a professional installation team of 30 skilled workers who have been thoroughly trained to complete the installation task. As a result, we can provide top-notch home design and construction when you need to build your house quickly and within your budget, assisting you in striking a balance between quality, function, and cost.
Guangdong Liyou Steel Structure has been progressively improving over the last several years, thanks to the scientific management group of 60 workers, which consists of industry specialists and business professionals. We have committed ourselves to offer our customers top-notch, competent sales services. We have clients from all over the world, including Angola, Palau, the Maldives, Ethiopia, Tanzania, the Caribbean, South Africa, Austria, the United Arab Emirates, Thailand, Malaysia, Vietnam, Peru, Australia, and Cyprus. Under the premise of win-win cooperation, Teamwork Steel Structure would work genuinely with clients to develop better residences.
No matter what you might need, you can count on our specialist team to provide some of the most reliable and effective steel structures on the market. With over 100 staff working dedicated to our factories, we’re able to export projects to over seventy different countries and have completed hundreds of projects as a steel structure manufacturer for clients just like you.
So, why choose anyone else to support your construction project; choose our detailed and uncompromisingly high-quality construction solutions instead. By working to the highest possible specifications for every project. And, by creating projects bespoke to your ideas and sketches, we ensure amazing results every time.
Customized design steel structure elevator for workshop and commercial building
Steel structure elevator is made of the main steel framework comprised of H steel and sub-structure structures like beams, C purlin, steel bar, pipe, angle steel components, etc. The roof and walls utilize a variety of panels.
All the prefabricated buildings can be designed to meet the customized load and seismic requirements for different countries and specific areas. A steel building system means all the steel structure frame components are cut, welded, and drilled at our factory. All of them are well prepared and ready for bolt-together assembly at the construction site.
Place of Origin: | Type: |
Foshan, China (Mainland) | High-Strength Steel |
Application: | |
Steel Workshop, Steel Structure Platform, Steel Fabricated House, Structural Roofing etc. | |
Standard: | Carbon Structural Steel: |
GB | Q235B, Q355B |
Color | Life Span: |
Whitegrey | Main Steel Structure 50 Years |
Drawing Design: | Keywords: |
AutoCAD, Tekla Structure, Vertex BD, SketchUp etc. | Steel structure stair |
| I | Main steel frame | ||
| 2 | Steel Beam | 口 550X200X16X16 、H300X200X10X12、 8# steel | |
| 3 | Steel Tread | -6mm steel Q235B diamond plate | |
| 4 | Connecting plate | 6-25mm Q355B | |
| 5 | Connecting plate | 3mm-10mm | |
| 6 | Ceiling | Acrylic lighting plate, LED light | |
| 7 | Flooring | PVC, Marble, Granite | |
| 8 | COP | Integrated COP, Surface mounted COP, Touch free COP | |
| 9 | Glass | Tempered glass 10mm | |
| 10 | Structure steel fabrication+Sanding + Paint (Epoxy zinc-rich primer 40 um+Alkyd finish 40um) | Acetylene, oxygen, electrode, Sa2.5 | |
FAQ
Q 1: What should be prepare for the site before start to built?
At the very least, you need concrete piers for the columns to sit upon. Most people pour a full foundation, but if you are using the building on a farm or ranch and plan to have dirt, gravel, or sawdust floors, a pier system may be preferable. In these situations, a popular option is to combine piers with concrete footing around the perimeter of steel building.
Q2. Do you have a recommended foundation and associated drawing?
Yes, we will provide foundation drawing and installation drawing for you after shipment. But the foundation drawing is just for reference because land and soil are diverse in different area.
Q3. Can add a brick wall to my steel building?
Yes, you can. For combined durability and beauty there is nothing like adding brick finishes to walls of your steel building. You receive the benefits of a hard wall, such as fire resistance, along with moisture resistance of a cavity wall.
Q4. Why does wind speed affect prices?
For most of the steel structure buildings, we design wind speed is about 110km/h. But for some strong wind countries,110km/h is not enough, like the Philippines and Mauritius 150~280km/h wind speed need to enlarge the beam and column, that will use more steel on it then increase the price a lot.
